Car equipment AK47 four-finger tiger hand buckle tiger finger boxing gloves fist buckle travel practice bracelet four-finger ring tiger

Pointed model specifications: Height (from the arc to the bottom): 60mm Width (from the arc): 111mm Thickness (from the arc): 9mm Palm width: 103.5mm Finger hole diameter 22mm
Weight: about 110 grams

Round model specifications: Height (from the arc to the bottom): 62mm Width (from the arc): 112mm Thickness (from the arc): 7mm Palm width: 106mm Finger hole diameter 23mm

Weight: about 112 grams

Packaging: Single transparent neutral OPP bag packaging

Note: The surface treatment process of the product is divided into two types: electroplating and spraying. Gold and silver surfaces are electroplated. Black is sprayed. Due to the characteristics of the process, electroplating and spraying require hanging processing, and it is inevitable that one of the inner edges of the finger hole will have an electrical contact point and a spray hanging point. The contact and hanging points of this product are located on the inner edge of the finger hole, which has less impact on the overall product; it is inevitable that there will be minor scratches and mold marks, polishing and grinding marks on the electroplated surface and paint surface of metal products, please be aware! Dear friends who mind, please think twice before placing an order with perfectionists;

The product is cast in one piece, and the die-cast alloy has good mechanical properties at room temperature. However, the tensile strength at high temperature and the impact performance at low temperature are significantly reduced, and it is not suitable for use in high temperature and low temperature (below 0??) working environments. Note: Please pay attention to the maintenance of metal products. It is easy to cause rust in high salt, high alkali, and high acidity environments. Please wipe off the sweat on the surface for long-term storage. If necessary, a layer of motor oil can be applied to the surface to form an oil film to isolate air oxidation.