Cross four-finger tiger ring fist buckle vehicle protective equipment four-finger boxing gloves fist ring hand buckle tiger four-finger buckle

Name: Cross Four-Finger Ring

Specifications: Height (from the arc of the fist to the bottom): 58mm Width (palm): 73mm Fist width (finger width): 105mm
Thickness (flat surface): 11.5mm Finger hole 26-21mm

Weight: about 121-131 grams

Material: zinc alloy

Surface electroplating (according to the actual shape of the human hand, the four finger holes gradually become smaller)

(There are gold, silver, and black in stock. Note: Due to differences in molds, individual weights vary. About 121 grams-131 grams)

Note: The surface treatment process of the product is divided into electroplating and spraying. Gold and silver surfaces are electroplated. Black is sprayed. Due to the characteristics of the process, it is necessary to hang up the electroplating and spraying. It is inevitable that one of the inner edges of the finger hole will have an electrical contact point and a spray hanging point. The contact and hanging points of this product are located on the inner edge of the finger hole, which has less impact on the overall product; it is inevitable that there will be minor scratches and mold marks, polishing and grinding marks on the electroplated surface and paint surface of metal products, please be aware! Dear friends who mind, please think twice before placing an order with perfectionists;

The product is cast in one piece of zinc alloy, and the die-cast zinc alloy has good mechanical properties at room temperature. However, the tensile strength at high temperature and the impact performance at low temperature are significantly reduced, and it is not suitable for use in high and low temperature (below 0??) working environments. Note: Please pay attention to the maintenance of metal products. In high salt, high alkali, and high acidity environments, the product is prone to rust. For long-term storage, please wipe off the sweat left on the surface. If necessary, a layer of motor oil can be applied to the surface to form an oil film to isolate air oxidation.