Extra large thickened brass knuckle hand buckle fist buckle ring

Material: Zinc alloy

Specifications (without rope): Height (from the arc surface to the bottom): 70mm, Width (from the fist surface): 125mm, Palm width: 114mm, Index finger hole diameter 28*24mm, Middle finger: 28*26mm, Ring finger: 26*24.5mm, Little finger hole: 25*22mm,
Note: Due to the loss of this model and the damage of the old mold, this model is now divided into two types: thick and thin.
Thickness (thickness of the fist surface): 11.5mm;
Thickness (thickness of the fist surface): 9mm;
Weight: Thick: about 220g-240g
Weight: Thin: about 160g-163g
Features: Larger, wider and heavier, super large finger holes, suitable for people with big hands and foreigners with big hands. The inner diameter of each finger hole is adjusted according to the characteristics of the human body, saying goodbye to the feeling of depression. The thickened weight reaches 0.24 kg; the thin version weighs 0.16 kg. The product is particularly large, so be careful if you have small hands!

Note: The finger hole is relatively large, and the style and shape are relatively beautiful.

Packaging: Single transparent neutral OPP bag packaging

Note: The product surface treatment process is divided into two types: electroplating and spraying. Gold and silver surface electroplating treatment. Black is spraying. Due to the characteristics of the process, electroplating and spraying need to be hung up for processing. It is inevitable that one of the inner edges of the finger holes will have an electrical contact point and a spray hanging point. The contact and hanging points of this product are selected on the inner edge of the finger hole, which has less impact on the overall product; the electroplated surface and paint surface of metal products will inevitably have fine scratches and mold prints, polishing and grinding marks, please be aware! Dear who mind, please think twice before placing an order with perfectionists;

The product is cast in one piece of zinc alloy, and the die-cast zinc alloy has good mechanical properties at room temperature. However, the tensile strength at high temperature and the impact performance at low temperature are significantly reduced, so it is not suitable for use in high temperature and low temperature (below 0??) working environments. Note: Please pay attention to the maintenance of metal products. Products are prone to rust in high salt, high alkali, and high acid environments. Please wipe off the sweat on the surface for long-term storage. If necessary, you can apply a layer of motor oil on the surface to form an oil film to isolate air oxidation.