Extra large thickened brass knuckles fist buckle suitable for big hands travel rings fist rings gloves ring rings four fingers

Features: Larger, wider and heavier, with extra-large finger holes, suitable for people with big hands and foreigners with big hands. The inner diameter of each finger hole is adjusted according to the characteristics of the human body, so you can say goodbye to the feeling of oppression. The thickened weight reaches 0.24 kg; the thin weight reaches 0.16 kg. The product is particularly large, so be careful if you have small hands!

Note: The finger holes are relatively large, and the style and shape are relatively beautiful.

Packaging: Single transparent neutral OPP bag packaging

Note: The surface treatment process of the product is divided into two types: electroplating and spraying. Gold and silver surfaces are electroplated. Black is sprayed. Due to the characteristics of the process, it is necessary to hang up the electroplating and spraying. It is inevitable that one of the inner edges of the finger holes will have an electrical contact point and a spray hanging point. The contact and hanging points of this product are selected on the inner edge of the finger hole, which has less impact on the overall product; it is inevitable that there will be fine scratches and mold marks on the electroplated surface and paint surface of metal products, and polishing and grinding marks, please be aware! If you mind, please think twice before placing an order with perfectionists;

The product is made of zinc alloy in one piece. The die-cast zinc alloy has good mechanical properties at room temperature. However, the tensile strength at high temperature and the impact performance at low temperature are significantly reduced. It is not suitable for use in high temperature and low temperature (below 0??) working environments. Note: Please pay attention to the maintenance of metal products. It is easy to cause rust in high salt, high alkali, and high acidity environments. Please wipe off the sweat on the surface for long-term storage. If necessary, you can apply a layer of motor oil on the surface to form an oil film to isolate air oxidation.