Rope Summoner Four-Finger Tiger Gloves

Name: Summoner Ring

Material: Zinc Alloy

Weight: About 130g

Specifications: Height (from the arc of the fist to the bottom of the palm): 74mm Width (fist): 123mm Thickness (fist): 4.5mm

Thickness of the rope part: 15mm

Finger hole size: (26mm)

Packaging: Single transparent neutral OPP bag packaging

Note: The surface treatment process of the product is spray-coated. The black surface is spray-coated. Due to the characteristics of the process, it is necessary to hang up the processing during electroplating and spray-coating. It is inevitable that one of the inner edges of the finger holes will have an electrical contact point and a spray-coated hanging point. The contact and hanging points of this product are selected on the inner edge of the finger hole, which has less impact on the overall product; the electroplated surface and paint surface of metal products will inevitably have fine scratches and mold marks, polishing and grinding marks, please be aware! Dear who mind, please think twice when placing an order with perfectionists;

The product is cast in one piece of zinc alloy, and the die-cast zinc alloy has good mechanical properties at room temperature. However, the tensile strength at high temperatures and the impact performance at low temperatures are significantly reduced, so it is not suitable for use in high and low temperature (below 0??C) working environments. Note: Please pay attention to the maintenance of metal products. High salt, high alkali, and high acidity environments can easily cause the product to rust. For long-term storage, please wipe off the sweat on the surface. If necessary, you can apply a layer of motor oil on the surface to form an oil film to isolate air oxidation. Note: The rope winding method is more complicated. If you need to untie it, please remember the steps clearly to facilitate re-winding. Due to different habits of workers, the winding method may be slightly different from the picture